Great progress has been made in the development and improvement of distribution transformers over the last decades.The application of high quality insulation material and suitable selection of the coil structure for high stress have contribute to the development of LS CAST RESIN Transformers. The LSCAST RESIN Transformer has succeeded in combining the advantage of oil-filled and conventional dry type transformers, which are fabricated with anepoxy resin. The windings are completely embedded under vacuum conditions.This casting method makes it possible to assure void-free epoxy penetration of both the inner layer and turn to turn insulation.

LS CAST RESIN Transformers canbe used in various fields.Here are just a few possibleapplications.
● Indoor and outdoor unit substations
● Off-shore flatforms
● Commercial buildings
● Hospitals
● Shopping centers
● Water supplies
● Traction systems
● SCR Power supplies

Contact for quotation

LS CAST RESIN Transformers confirm to the requirementsof IEC 60076-11 (2004).However we can also meet the requirements of the followingstandards, upon request.
● ANSI / IEEE C57.12.01 (2005): General requirement for dry-type distribution and powertransformers.
● CSA Standard C9-M1981: Dry type transformers.
● HD538.1,2,3(1995): 3 Phase Dry type distribution transformers. 50Hz from 100kVA to 2500kVA
● BS 7806 (1995): Dry type Power transformers
● AS 2374 (1982): Power transformers
* Transformers for rectifier applications and other special purposescan be supplied according to the client’s specification.


Rated voltage HV COIL: Up to 36kV
LV COIL: Up to 600V
* Dual High voltage coils can also be supplied.
Standard Tapping range : ±2.5%, ±5%
* Other ratings are available by request
Power capacity Single phase: 20 ~ 2,000kVA
Three phase: 50 ~ 15,000kVA
Frequency 50Hz, 60Hz
Other frequency is available by request
% Impedance voltage IEC STD : 4 ~ 8%
ANSI STD : 5.75%
* Other % impedance voltages are available.
Connections HV COIL : Delta
LV COIL : Star with neutral point
* Other connections are available to meet requirement.
Temperature class (According to IEC 60076-11) HV COIL and LV COIL : F CLASS
* H class coils are available by request.
Conductor Aluminum (standard)
Copper (optional)
Noise Level (according to NEMA Std.) 500kVA – 60dB
750kVA – 64dB
1000kVA – 64dB
1500kVA – 65dB
2000kVA – 66dB
2500kVA – 68dB


Environmentally safe: LS CAST RESIN Transformers will not emit oil or toxicgases into the atmosphere. Therefore, they do not pollutethe environment and are strongly recommended as areplacement for askarel(PCB)-filled transformers.
High overload capability: Based on the high thermal time constant factor of thewindings, LS CAST RESIN Transformers can be overloadedfor a short duration considerably higher than oil-immersedtransformers. It has a greater capability to withstand suddenhigh overloads such as might be encountered in heavytraction applications.
Moisture proof: The complete casting of coils under vacuum prevents thepenetration of moisture into the winding. Therefore, it is suitable for both storage and operation inharsh environment and is capable of being switched onimmediately after such storage without pre-drying.
High impulse strength: LS CAST RESIN Transformers are very resistant to impulsevoltage.Impulse withstand levels to 200kV are available because ofcareful design and special structure.
No partial discharge: There is no possibility of partial discharge in LS CASTRESIN Transformers.Whole core & coil is tested to guarantee the life expectancyof the insulation system. LS CAST RESIN Transformers are free of partial dischargeat least up to 1.3 times of the rated voltage
Maintenance free: Maintenance is almost completely eleminated. No checkingof liquid level and no dielectric test for moisture absorption isrequired.Due to the smooth coil surface, heavy dirt and dust build upis eleminated even under the worst circumstances. The recommended routine maintenance is an occasionalvisual inspection.
Fire resistant: LS CAST RESIN Transformers have a very excellentcharacteristic of self fire-extinguishing and fire resistance. So there would be no fear of spread of fire even if fire tookplace around the electricity room.
Low noise: The coating of the core with an epoxy resin havelead to anappreciable noise reduction. Noise is also reduced due tothe sound suppresing effect of the step lap cutting.


Main Switchboadrds

Introduce:The switchboard distributes the total input MSB for the entire low-voltage electrical system of a building,Application:Installed in the general electrical engineering room of industrial and civil works

Read more

Busway Schneider

IntroductionThe busbar trunking system (from 800A), both feeder and plug-in, shall be sandwich construction. All busbar trunking products and fittings (straight length, elbow, tees, flanged ends, cable tap box and circuit breaker, etc.) shall be in accordance with IEC 60439:2005 or UL857 and from the same manufacturer as the busbar trunking system. The degree of protection of the busbar trunking system should be IP54 in accordance to IEC 60529.Rated operation voltage of the busbar trunking is 1000V. 3 Phase, 4 Wire with 50% capacity continual integral/internal earth busbar. The neutral conductor should have the same cross-sectional area as the phase conductor (3P 4W 100%N + 50%E). The earth busbar must be one continuous piece without bolting on housing.ApplicationBusway is used to transmit power instead of conventional power cable.

Read more

Cable tray - Cable ladder

Introduction:Cable tray, cable ladder and supporting system is the main load bearing structure of electric cable system. These materials often being the last-order of electric materials in each project, thus the short delivery time is one of the key factors.Hawee is one of the pioneers in applying new modern material on producing cable tray, cable ladder and supporting system with the aim of shortening the delivery time to site.Application:Cable tray, cable ladder system is applied in all M&E system.

Read more

Related Posts

BlokSet cabinets continue to be installed in phase II of Vinh Phuc General Hospital

Production and Trading Company (Hawee P&T) has just signed a contract to supply Blokset cabinets in phase 2 of the project of Technical houses and ancillary works - Vinh Phuc General Hospital

Hawee P&T successfully energizes a 35kV transformer at Hoa Phat Dung Quat factory

Hawee P&T has recently tested, accepted, and successfully energised a 35kV substation at the Prestressed Steel Factory located in the Hoa Phat Dung Quat Iron and Steel Complex with the investor - Hoa Phat Dung Quat Steel Joint Stock Company.

Hawee P&T electrical cabinets present at Nestles Tri An factory

Hawee P&T welcomes the new year 2022 with a contract worth nearly VND 25 billion when successfully signing a contract to supply all equipment and Schneider Electric's BlokSet copyright electrical cabinets at Nestlé Tri An - Dong Nai factory. into a new year conquering new heights.