Vesbo PP-R Pipes and Fittings
Introduction
The Vesbo Piping System is built by renowned European corporations such as Battenfeld and Kras-Maffel. Whereas its raw materials are produced by famous firms such as SABIC, Borealis, and Basell. Aside from that, Vesbo PPRC pipes & fittings are developed through heavy research and development so that you can be assured of a truly Vesbo-level quality and performance piping system. To appear in Vietnam since 2003, Vesbo has been used for a lot of large projects such as: Pacific Place, Vincom 2 Tower, Hoa Binh Tower, Green Hill, Long Beach Resort, Sky City Tower…
Application
VESBO is plumbing system for clean, non-toxic water, hygiene and food safety for residential houses, luxury condominium project, the public projects
Product life
PPR pipes can withstand high temperature and high pressure, corrosion resistant. It can be used at least 50 years of temperature 70 ° C and 1.0 MPa pressure. In normal temperature conditions, it can be used over 100 years.
Meet the requirements of the building
Lightweight and easy to install
Using Soldering technology, ensuring seamless connections.
Energy Conservation
PP-R pipes minimize heat loss in hot water applications. Coefficient of thermal conductivity at 200C is only 0.24W / mK while copper pipe is 324W / mK.
Recycled materials. Scrap PP-R can be recycled to produce pipes and fittings after being cleaned and crushed. Number of recycled materials used is less than 4% so as not to affect product quality.
Hygienic
The chemical term of PP-R materials contains hydrocarbons, and no hazardous materials. It is used not only for hot and cold piping, but also for water purification systems.
| No | PP-R Vesbo cold water pipes | Unit | PP-R Vesbo hot water pipes | Unit |
| (VND) | (VND) | |||
| 1 | PN10 20mm x 2.3mm | 29,400 | PN20 20mm x 3.4mm | 40,800 |
| 2 | PN10 25mm x 2.3mm | 46,800 | PN20 25mm x 4.2mm | 63,000 |
| 3 | PN10 32mm x 2.9mm | 64,000 | PN20 32mm x 5.4mm | 98,600 |
| 4 | PN10 40mm x 3.7mm | 98,500 | PN20 40mm x 6.7mm | 162,000 |
| 5 | PN10 50mm x 4.6mm | 152,000 | PN20 50mm x 8.3mm | 252,000 |
| 6 | PN10 63mm x 5.8mm | 243,000 | PN20 63mm x 10.5mm | 392,000 |
| 7 | PN10 75mm x 6.8mm | 334,000 | PN20 75mm x 12.5mm | 565,000 |
| 8 | PN10 90mm x 8.2mm | 490,000 | PN20 90mm x 15mm | 824,000 |
| 9 | PN10 110mm x 10.0mm | 736,000 | PN20 110mm x 18.3mm | 1,264,000 |
| No | PP-R Vesbo UV cold water pipes | Unit | PP-R Vesbo UV hot water pipes | Unit |
| (VND) | (VND) | |||
| 1 | PN10 20mm x 2.3mm | 38,800 | ||
| 2 | PN10 25mm x 2.3mm | 56,500 | PN20 25mm x 4.2mm | 80,000 |
| 3 | PN10 32mm x 2.9mm | 82,500 | PN20 32mm x 5.4mm | 124,900 |
| 4 | PN10 40mm x 3.7mm | 125,300 | ||
| 5 | PN10 50mm x 4.6mm | 189,800 | ||
| 6 | PN10 63mm x 5.8mm | 302,500 |
100% European (Vestolen) premium virgin raw-material
German technology and standards
Uses innovative “Fusion Welding Technology”
High chemical resistance
Absolutely leak-proof
Noise free at high flow rates
Suitable for both hot & cold applications
Hygienic and environmentally-friendly
Nominal pressure of PN 20
Up to 100 C temperature tolerance
Signature ivory-white color with 4 red lines for distinction
RELATED PRODUCTS
Main Switchboadrds
Introduce:The switchboard distributes the total input MSB for the entire low-voltage electrical system of a building,Application:Installed in the general electrical engineering room of industrial and civil works
Read more
Transformer
Introduction:Great progress has been made in the development and improvement of distribution transformers over the last decades.The application of high quality insulation material and suitable selection of the coil structure for high stress have contribute to the development of LS CAST RESIN Transformers. The LSCAST RESIN Transformer has succeeded in combining the advantage of oil-filled and conventional dry type transformers, which are fabricated with anepoxy resin. The windings are completely embedded under vacuum conditions.This casting method makes it possible to assure void-free epoxy penetration of both the inner layer and turn to turn insulation.ApplicationLS CAST RESIN Transformers canbe used in various fields.Here are just a few possibleapplications.● Indoor and outdoor unit substations● Off-shore flatforms● Commercial buildings● Hospitals● Shopping centers● Water supplies● Traction systems● SCR Power supplies
Read more
Busway Schneider
IntroductionThe busbar trunking system (from 800A), both feeder and plug-in, shall be sandwich construction. All busbar trunking products and fittings (straight length, elbow, tees, flanged ends, cable tap box and circuit breaker, etc.) shall be in accordance with IEC 60439:2005 or UL857 and from the same manufacturer as the busbar trunking system. The degree of protection of the busbar trunking system should be IP54 in accordance to IEC 60529.Rated operation voltage of the busbar trunking is 1000V. 3 Phase, 4 Wire with 50% capacity continual integral/internal earth busbar. The neutral conductor should have the same cross-sectional area as the phase conductor (3P 4W 100%N + 50%E). The earth busbar must be one continuous piece without bolting on housing.ApplicationBusway is used to transmit power instead of conventional power cable.
Read moreRelated Posts
Hawee P&T Successfully Energized BlokSet Cabinet System of Ho Guom Theater
On the morning of June 23, 2023, Ho Guom Theater officially and successfully energized the BlokSeT, MDB, DB low-voltage cabinets... supplied by Hawee P&T.
BlokSet cabinets continue to be installed in phase II of Vinh Phuc General Hospital
Production and Trading Company (Hawee P&T) has just signed a contract to supply Blokset cabinets in phase 2 of the project of Technical houses and ancillary works - Vinh Phuc General Hospital
Hawee P&T successfully energizes a 35kV transformer at Hoa Phat Dung Quat factory
Hawee P&T has recently tested, accepted, and successfully energised a 35kV substation at the Prestressed Steel Factory located in the Hoa Phat Dung Quat Iron and Steel Complex with the investor - Hoa Phat Dung Quat Steel Joint Stock Company.