Pix 24 MV Switchboard
Introductions:
Medium voltage switchboard is used for power switching, distribution and metering in medium voltage network or loads. Medium voltage switchboard is designed and type tested according to IEC 62271-200 and IEC 61641 standards. Production quality management is applied ISO 9001:2008 and ISO 14001:2004, ensuring high stability and safety on operation.
Applications:
Medium Voltage switchboard is widely used in power stations, distribution network of power companies, industry zones, factories and buildings.
| Applications | Distribution |
| Motor Control | |
| Reference Standards | IEC 62271-200 |
| IEC 61641 | |
| Certificates | ASTA |
| Installation | Indoor |
Electrical specifications
| Standards | IEC 62271-200 |
| Rated voltage | 7.2 ~ 24 kV AC |
| Rated frequency | 50/60Hz |
| Rated power frequency withstand voltage (kV/1min) | 50 ~ 60 |
| Rated lighting impulse withstand voltage ( kV/50μs] ) | 125 |
| Rated short-time impulse withstand voltage (kA/s) | Up to 50kA |
| Rated current (A) | 630/1250/2500 |
| VCB Model | Schneider |
Mechanical Specifications
| Cable inlet | Bottom |
| Ingress protection | 31 |
| Form | Metal Clad |
| Average weight | 700kg |
| Surface finish | Electro-static powder-coated 50μm |
| Standard colors | RAL7032 (pebble grey) |
Design, type test and production are according to IEC 62271-200 and IEC 61641;
Enclosure is made from imported steel sheet according to industrial standard JIS G3302 (Japan), EN10142 (Europe) and ASTM A653/A653-08 (America);
Surface treatment: Zinc coated or electro-power coated under strictly quality assurance procedure to ensure long life time of product;
Accessories for switchboard are carefully selected, standardized to ensure fine appearance and utilized for installation and operation.
RELATED PRODUCTS
Main Switchboadrds
Introduce:The switchboard distributes the total input MSB for the entire low-voltage electrical system of a building,Application:Installed in the general electrical engineering room of industrial and civil works
Read more
Transformer
Introduction:Great progress has been made in the development and improvement of distribution transformers over the last decades.The application of high quality insulation material and suitable selection of the coil structure for high stress have contribute to the development of LS CAST RESIN Transformers. The LSCAST RESIN Transformer has succeeded in combining the advantage of oil-filled and conventional dry type transformers, which are fabricated with anepoxy resin. The windings are completely embedded under vacuum conditions.This casting method makes it possible to assure void-free epoxy penetration of both the inner layer and turn to turn insulation.ApplicationLS CAST RESIN Transformers canbe used in various fields.Here are just a few possibleapplications.● Indoor and outdoor unit substations● Off-shore flatforms● Commercial buildings● Hospitals● Shopping centers● Water supplies● Traction systems● SCR Power supplies
Read more
Busway Schneider
IntroductionThe busbar trunking system (from 800A), both feeder and plug-in, shall be sandwich construction. All busbar trunking products and fittings (straight length, elbow, tees, flanged ends, cable tap box and circuit breaker, etc.) shall be in accordance with IEC 60439:2005 or UL857 and from the same manufacturer as the busbar trunking system. The degree of protection of the busbar trunking system should be IP54 in accordance to IEC 60529.Rated operation voltage of the busbar trunking is 1000V. 3 Phase, 4 Wire with 50% capacity continual integral/internal earth busbar. The neutral conductor should have the same cross-sectional area as the phase conductor (3P 4W 100%N + 50%E). The earth busbar must be one continuous piece without bolting on housing.ApplicationBusway is used to transmit power instead of conventional power cable.
Read moreRelated Posts
BlokSet cabinets continue to be installed in phase II of Vinh Phuc General Hospital
Production and Trading Company (Hawee P&T) has just signed a contract to supply Blokset cabinets in phase 2 of the project of Technical houses and ancillary works - Vinh Phuc General Hospital
Hawee P&T successfully energizes a 35kV transformer at Hoa Phat Dung Quat factory
Hawee P&T has recently tested, accepted, and successfully energised a 35kV substation at the Prestressed Steel Factory located in the Hoa Phat Dung Quat Iron and Steel Complex with the investor - Hoa Phat Dung Quat Steel Joint Stock Company.
Hawee P&T electrical cabinets present at Nestles Tri An factory
Hawee P&T welcomes the new year 2022 with a contract worth nearly VND 25 billion when successfully signing a contract to supply all equipment and Schneider Electric's BlokSet copyright electrical cabinets at Nestlé Tri An - Dong Nai factory. into a new year conquering new heights.