Rack Cabinets
Introduction
Rack cabinet is used to contain IT equipments, network,… for the server systems in data centers and communication-network cabinets.
Application
Rack cabinet is installed in serve rooms, data centers, IT room of the buildings and factories.
Modular design strengthens load capacity, resistant to twisting;
The hanging bars are specially designed to easily adjust the used depth. U number printed clearly, and key ID marked accurately, easy to install devices;
The cabinet is designed into two types of widths in order to contain the large quantity of cables and network equipment;
The door can open frontly or rearly and easily convert to each other and having protective lock;
The front/rear door is glass or transient grid;
The front/rear has grid holes that make 70% vetilation;
The side door is designed into top and bottom (excluding cabinet < 27U), light weight and having protective lock;
Cable inlets are integrated in the top and bottom of the cabinet;
Special wheels with low, large-surface, high load capacity design;
The cabinet is integrated the bottom system to fix and calibrate;
The earthing points are connected in the bottom of the cabinet, with a central earthing wattle.
Full auxiliaries: fans, hanger, power bars,…
| Tiêu chuẩn | ANSI/ EIA 310-D, |
| Type A | |
| DIN 41494 | |
| BS5954 Part 2 | |
| IEC 60297-1 & 2 | |
| Đường cáp vào | Trên hoặc dưới |
| Độ dày tôn | 2mm |
| – Khung tủ | 2mm |
| – Thanh treo thiết bị | 1.2mm |
| – Cửa trước sau | 1mm |
| – Cửa hông | 1.5mm |
| – Đế tủ | |
| Kiểu lắp đặt | Đến 27U/ Up to 27U |
| – Treo tường | 19U đến 48U/ 19U to 48U |
| – Đặt sàn | |
| Tải trọng | 1000kg |
| – Trên bánh xe | 1200kg |
| – Trên chân đế | |
| Lớp phủ bề mặt | Sơn tĩnh điện |
| Màu sắc mặc định | RAL9005 |
| Phụ kiện | Đầy đủ phụ kiện tùy |
RELATED PRODUCTS
Main Switchboadrds
Introduce:The switchboard distributes the total input MSB for the entire low-voltage electrical system of a building,Application:Installed in the general electrical engineering room of industrial and civil works
Read more
Transformer
Introduction:Great progress has been made in the development and improvement of distribution transformers over the last decades.The application of high quality insulation material and suitable selection of the coil structure for high stress have contribute to the development of LS CAST RESIN Transformers. The LSCAST RESIN Transformer has succeeded in combining the advantage of oil-filled and conventional dry type transformers, which are fabricated with anepoxy resin. The windings are completely embedded under vacuum conditions.This casting method makes it possible to assure void-free epoxy penetration of both the inner layer and turn to turn insulation.ApplicationLS CAST RESIN Transformers canbe used in various fields.Here are just a few possibleapplications.● Indoor and outdoor unit substations● Off-shore flatforms● Commercial buildings● Hospitals● Shopping centers● Water supplies● Traction systems● SCR Power supplies
Read more
Busway Schneider
IntroductionThe busbar trunking system (from 800A), both feeder and plug-in, shall be sandwich construction. All busbar trunking products and fittings (straight length, elbow, tees, flanged ends, cable tap box and circuit breaker, etc.) shall be in accordance with IEC 60439:2005 or UL857 and from the same manufacturer as the busbar trunking system. The degree of protection of the busbar trunking system should be IP54 in accordance to IEC 60529.Rated operation voltage of the busbar trunking is 1000V. 3 Phase, 4 Wire with 50% capacity continual integral/internal earth busbar. The neutral conductor should have the same cross-sectional area as the phase conductor (3P 4W 100%N + 50%E). The earth busbar must be one continuous piece without bolting on housing.ApplicationBusway is used to transmit power instead of conventional power cable.
Read moreRelated Posts
BlokSet cabinets continue to be installed in phase II of Vinh Phuc General Hospital
Production and Trading Company (Hawee P&T) has just signed a contract to supply Blokset cabinets in phase 2 of the project of Technical houses and ancillary works - Vinh Phuc General Hospital
Hawee P&T successfully energizes a 35kV transformer at Hoa Phat Dung Quat factory
Hawee P&T has recently tested, accepted, and successfully energised a 35kV substation at the Prestressed Steel Factory located in the Hoa Phat Dung Quat Iron and Steel Complex with the investor - Hoa Phat Dung Quat Steel Joint Stock Company.
Hawee P&T electrical cabinets present at Nestles Tri An factory
Hawee P&T welcomes the new year 2022 with a contract worth nearly VND 25 billion when successfully signing a contract to supply all equipment and Schneider Electric's BlokSet copyright electrical cabinets at Nestlé Tri An - Dong Nai factory. into a new year conquering new heights.